Detroit Auto Show: 2008 Cadillac CTS

Cadillac chose the road of evolution for its all-new CTS which will be available in the American market in the second half of the year. While its exterior design follows on the lines of the current model, the interior is fully redesigned and according to Cadillac, heavily improved in terms of quality. For the first time buyers of the CTS will be able to opt for an all-wheel-drive system. The 2008 model will be available with a 210Hp 2.8 V6 (not in the US), a 258Hp 3.6 V6 and debut GM’s new 3.6L direct-injection V-6 VVT engine, delivering an estimated 300 horsepower (223 kW) and 270 lb.-ft. (366 Nm) of torque. Apart from the introduction of the sporty CTS-V later on, it is rumored that the CTS’s range will be enhanced with station and coupe versions. -Continued: Click “Read More…” below to see the official press release and a high-res gallery

PRESS RELEASE

Exterior: sporty sophistication meets substance: Coupled with a new overall shape, the most evolutionary dimension of the 2008 CTS comes in the form of a two-inch wider track as a result of the addition of the new, optional all-wheel-drive configuration. The wider stance gives the new model a more planted, capable and well-grounded appearance that’s exemplified by much tighter tire-to-fender relationships.

The wider stance also enables more tumblehome – the vehicle sides are sculpted inward – delivering an appearance of rear-wheel-drive performance with a lower roof line, without compromising headroom or a roomy interior. Additionally, a wider, tapering sail panel, lower, more sculpted hood, smoother wheel housing lips and a tighter wheel-to-body relationship help communicate the CTS’ agility as well as its sophistication and substance. Seven-spoke, 17-inch wheels or available nine-spoke, 18-inch wheels surround larger high-performance brake calipers and rotors. Both painted and machined finishes are available for the standard 17-inch wheels. The larger, 18-inch wheels are available in a premium multicoat finish or a high-polish finish.

Inspired by Cadillac’s landmark Sixteen concept car, the CTS front appearance is immediately recognizable, yet also is new. The large, chrome dual-textured grille is significantly more vertical in shape, and is both aggressive and intricate. A large center-positioned wreath and crest add to the three-dimensional face. The front fascia is balanced with vertically stacked headlamps with bright bezels stacked in a staircase-like array. The lower air intake is flanked on both sides with fog lamps and brake duct intakes.

Side air extractors located forward of the front doors are a modern homage to Cadillac’s grand heritage. Additional bright details include chrome molding surrounding the side windows, and three-inch chromed exhaust outlets. Even on the rear of the car, where many sedans are ordinary, Cadillac designers injected charisma. The vertical taillamps are a Cadillac trademark. The roofline and rear backlight have a coupe-like profile. At the centerline, the decklid carries the angular and directional theme of the front.


Dimensionally, the 2008 CTS is 191.6 inches (4766 mm) long, 72.5 inches (1841 mm) wide and 58 inches (1472 mm) in height. Wheelbase is 113.4 inches (2880 mm) with a front/rear track of 61.8 / 62.0 inches (1575 / 1585 mm).

Interior: performance and elegance combine: The 2008 CTS represents a new design theme for Cadillac interiors, emphasizing technical precision with elegant, hand-crafted details. Dramatically different from the original, the interior design is decidedly more upscale, with added ornamentation, luxury and attention to detail. Strict attention to packaging, premium materials, surface development and comfort combine to meet the discriminating tastes of luxury performance sedan buyers.

Upper instrument panel and door trim surfaces are hand-cut, sewn and wrapped by expert craftsmen. Analog instrumentation that is tightly framed with a compact hood tri-tubular, chromed cluster, is defined by bright accents. An integrated center stack design, with either a satin metallic finish or genuine Sapele wood, blends into the lower instrument panel that sweeps forward and away of front-seat occupants. The hand-assembled center console leads seamlessly into the center stack, providing a sportier “cockpit” feel for the driver and passenger without compromising space.

Heated and ventilated seats incorporate new “thin-seat” technology for maximum occupant comfort and enhanced rear-seat leg, knee and foot room. A signature V-shaped medallion appears as a decorative touch on the backs of the front seats. French stitching is used throughout the interior, including the upper instrument panel, door inserts, seats and the shifter boot.

Clean, white ambient light emitting diode (LED) soft backlighting is positioned in the door pulls, foot wells and recessed between the upper and lower instrument panels. The result is a dramatic effect similar to recessed lighting used in contemporary homes. The leather-wrapped steering wheel includes standard integrated controls for cruise and audio system. Inside and out, the 2008 CTS exemplifies an evolution of Cadillac design that achieves a remarkable combination of luxury, technology and performance in a sedan aimed at creating the desire and head-turning quotient normally reserved for sports cars.


New 3.6L V-6 VVT, six-speed automatic join powertrain lineup. Available in AWD and RWD versions: The 2008 Cadillac CTS features GM’s new 3.6L direct-injection V-6 VVT engine, delivering an estimated 300 horsepower (223 kW) and 270 lb.-ft. (366 Nm) of torque. This new powerplant is a compelling mixture of power, smoothness, efficiency and technical sophistication.

The 3.6L direct-injection engine will be the top-level engine option for the 2008 CTS, joining the existing 2.8L V-6 and 3.6L V-6. Designed to operate with regular unleaded gasoline, the new 3.6-liter direct-injection V-6 produces power similar to many V-8 engines, but with much better fuel economy. With direct injection, fuel is delivered directly to the combustion chamber to create a more complete burn of the air/fuel mixture. Less fuel is required to produce the equivalent horsepower, especially at normal cruising speeds, of a conventional port-injection combustion system.

The application of gasoline direct-injection technology on the 3.6L VVT engine contributes greatly to a 15-percent increase in horsepower; 8-percent increase in torque, and 3-percent improvement in brake-specific fuel consumption. Additionally, the application of direct injection reduces cold-start hydrocarbon emissions by 25 percent.

For the first time, the 2008 CTS will be available in both rear- and all-wheel-drive configurations. Additionally, the transmission lineup now consists only of six-speed units – an Aisin six-speed manual or – new for CTS – a Hydra-Matic 6L50 six-speed automatic.

The current 3.6L VVT engine that produces 258 horsepower (192 kW) and 252 lb.-ft (342 Nm) of torque will serve as the base engine in North America and will be available in rear- and all-wheel-drive layouts. The 2.8L VVT engine will be available only on rear-drive export models of the CTS. The all-aluminum, 60-degree DOHC, four-valve-per-cylinder engine develops 210 horsepower (156 kW) at 6500 rpm and 194 lb.-ft. (263 Nm) of torque at 3200 rpm.

The Aisin six-speed manual transmission, introduced in 2005, is fully synchronized (including reverse) with a single overdrive. This allows for lower propshaft speeds and improved engine noise, vibration and harshness. A new short-throw shifter has been added for improved precision. The Hydra-Matic 6L50 six-speed automatic is the same transmission introduced on the Cadillac STS-V in 2005, and is designed to decrease engine rpm and enhance overall fuel economy.

On vehicles equipped with the new all-wheel-drive system, the 6L50 will be equipped with a new active transfer case that automatically transfers torque from the rear to the front of the vehicle for optimal traction, safety and performance. A limited-slip differential also is available.

Chassis enhancements include all wheel drive, globally tested suspension: The 2008 CTS features a greatly revised chassis featuring a two-inch wider track and the application of all-wheel drive. The front track is increased to 61.8 inches (1569 mm), and rear track is now 62.0 inches (1575 mm). Wheelbase remains at 113.4 inches (2880 mm).

Cadillac engineers have designed and developed new geometry for both the independent short/long arm front suspension and the multilink rear suspension. Engineers implemented numerous tweaks and revisions to the suspension using extensive computer modeling, combined with development driving of prototype cars on roads all over the world, but mostly in North America, Europe and China . From famed tracks such as Germany ’s Nürburgring to everyday roads in the U.S. and China, the CTS suspension was exhaustively tested and honed.

The use of aluminum in the upper and lower front control arms and knuckles helps reduce mass and contributes to higher limits in handling and dynamic wheel control. Front suspensions for the rear-drive model and the all-wheel-drive version, while similar, have been designed to best meet the chassis dynamics of the individual versions. The engine cradle has six attachment points, two more than typically used on a performance sedan, to better handle heavier loads and engine vibration.

New for CTS is a tower-to-tower brace that adds cross-car stiffness and enhances the overall steering feel. This is an innovation from the high-performance CTS-V model that has been modified and adapted for use in the 2008 CTS. The multilink rear suspension, with a fully isolated subframe, is an uncompromising design with excellent suspension kinematics that delivers a superior ride with excellent handling. The rear suspension design is shared in both the rear-wheel and all-wheel-drive models, and has been extensively revised to accommodate the larger rear track.

The braking and steering systems for CTS are all-new, with extensive changes to increase responsiveness, premium “feel” and performance in spirited driving conditions. The 2008 CTS features standard 17-by-8-inch aluminum wheels paired with Michelin H-rated (P235/55R17) all-season radials. The optional performance suspension includes an 18- by- 8.5-inch wheel with the all-new Michelin Pilot Sport 2 (P235/50R18) tire that can either be V- or Y- (summer) rated.

In addition to this finely tuned hardware, the 2008 CTS features advanced chassis technology in the form of Cadillac’s StabiliTrak electronic chassis control system. StabiliTrak integrates the car’s standard four-channel ABS with the full-function traction control, hydraulic brake assist and engine drag control systems.

Technorati: Cadillac+CTS, auto+news, car+news, automobile, cars, automotive, vehicles, Carscoop, blogs, 2007, pictures, images, Detroit+Auto+Show, NAIAS

No comments:

Post a Comment